Lubricating fluids

NEOFLUID, M.M.712, 705, 990-140, 950-140 & manual distributor.

Lubricants

Lubricating fluid NEOFLUID

Lubricating fluid recommended for Bio DIAMANT® NEOLAP® slurries. Formulation without volatile organic compounds (VOCs) and without dangerous substances, this biodegradable fluid is adapted for the lapping and polishing of most materials. It allows controlling perfectly the heating of the lapping plates during production cycles, thereby guaranteeing excellent flatness. Its association with the Bio DIAMANT® NEOLAP® slurries guarantees a stable, uniform abrasive film during the various work processes. Its active principles protect materials sensitive to corrosion.

 Characteristics
Packaging Ref. 
VOC free. Dedicated to materials sensitive to corrosion. 1 liter 07 NEF10 30
5 liters 07 NEF10 40

Lubricating fluid M.M.712

Aqueous lubricating fluid recommended with the Bio DIAMANT® series 122 and M.M.130-140, and liquid series M.M.330-340. It is compatible with the new Bio DIAMANT® NEOLAP® slurries series 300 and 400.

Ready to use, its specific formula prevents the support from heating and facilitates the cleaning of parts with water or by adding the detergent 742.

 Characteristics
Packaging Ref. 
Lapping in high production.
Usage with a dosing distributor.
1 liter 07 MM712 30
5 liters 07 MM712 40
Pulmatic 350 cc 07 MM712 50

Lubricating fluid M.M.705

Lubricating fluid to be used with the diamond compounds series 210. Ready-to-use, it
ensures an excellent dispersion of the compound and optimises its lapping power. Cleans easily with the detergent 742 or Stanol..

 Characteristics
Packaging Ref. 
0 % of water. Dedicated for manual use. 1 liter 07 MM705 30
Pulmatic 350 cc 07 MM705 50

Lubricating fluid M.M.990-140

This lubricant fluid is recommended for usages with the diamond slurries series 241P. Ready-to-use, its low viscosity creates a very fine abrasive film during the work process, which ensures a high lapping efficiency. It is compatible with the new Bio DIAMANT® NEOLAP® series 100 and M.M. 130-140. Use the detergent 742, Stanol or apply solvents to clean the parts.

 Characteristics
Packaging Ref. 
0 % of water. Use with a dosing distributor. 1 liter 07 MM711 30
5 liters 07 MM711 40

Lubricating fluid M.M.950-140

Oil-based lubricating fluid. Due to its low evaporation rate, it is recommended for large lapping or polishing support. This fluid is not subjected to the regulation on the transport of dangerous materials (ADR, IMDG, IATA).

 Characteristics
Packaging Ref. 
0 % of water. Use with a dosing distributor. 1 liter 07 MM950 30
5 liters 07 MM950 40

Distributor

Manuel distributor

 Characteristics
Packaging Ref. 
Bottle to be filled Pulmatic 350 cc
2 units
08 00802 00

In the same category Consumables

  • Diamond abrasives

  • Lubricating fluids

  • Composite abrasives

  • Additives, lubricants & oils

    Assistance & information

    We will contact you

    Get a call from a LAM PLAN advisor.

    Call us

    For all your technical or commercial requests


    Our social networks

    • Lapping supports
    • Pre-polishing discs
    • Abrasive liquids
    • Polishing supports
    • Diamond polishing liquids
    • Diamond lapping liquids
    • Diamond superfinition products
    • Abrasive liquids

      All rights reserved © LAM PLAN SA 2019
      Made by : CtoutcomStudio

      Contact us

      LAM PLAN SA
      7, rue des Jardins - B.P.15
      74240 Gaillard - France
      header-receiver +33 (0)4 50 43 96 30

      Our dealers