Lapping & polishing machines

LAM PLAN lapping and polishing machines have been developed with the products of our patented LAM PLAN M’M’ system. The LAM PLAN range of lapping and polishing machines respond to multiple lapping and polishing applications. These machines will respond to the market’s demand in terms of high quality polishing flattening of surfaces inferior to a micron.

M.M.8400

Lapping & polishing machine for variable production of small parts:
Ø 5 to 130 mm

This machine allows you to add a finishing tool to your shop for flat surfaces at a reasonable cost.

M.M.8600

Lapping & polishing machine for moderate production of small parts:
Ø 5 to 130 mm

Simple and proven, equipped with a medium size plate, they enable you to elaborate small production with controlled costs.

M.M.8380
version E / S

Lapping & polishing machine for high production of small parts:
Ø 5 to 130 mm

M.M. 8000 version E and S series have been specially conceived to respond to all production applications.

M.M.8700
version E / S / S HP

Lapping & polishing machine for moderate production of small parts:
Ø 5 to 250 mm

A lapping & polishing machine in 3 versions that has been specially developed for all operations requiring very heavy loads on the parts to be treated.

M.M.9700
version S

Lapping & polishing machine for high production of small parts:
Ø 5 to 250 mm

This machine is equipped with a lapping plate Ø 700 mm. It integrates a brand new touch screen interface, intuitive, allowing to take very easily the equipment in hand.

M.M.8100
version E, S et EC

Lapping & polishing machine large capacity for parts:
Ø10 to 350 mm

A large capacity lapping & polishing machine available in 3 versions: pneumatic cylinders, load weights and an EC version.

M.M.8120
version E et S

Lapping & polishing machine large capacity for parts:
Ø 20 to 450 mm

A large capacity lapping & polishing machine available in 2 versions: pneumatic cylinders or load weights.

M.M.8150
version E et S

Lapping & polishing machine large capacity for parts:
Ø 20 to 580 mm

A large capacity lapping & polishing machine available in 2 versions: pneumatic cylinders or load weights.

MASTERLAM®
Evolution

Polishing machine small series and double-side prototyping for parts:
Ø 5 to 20 mm

A compact and economical solution for double-side polishing, to realise high quality polishing on any kind of small parts.

M.M.2380

Lapping & polishing machine double-side production for parts: Ø 5 to 30 mm

This machine will be the solution when obtaining a geometry and precise dimensions are key factors.

Guidance

The wide spectrum of the proposed versions allows treating parts of all dimensions, from micro mechanic to sealing parts measuring several decimetres. Our equipment, associated to our consumables will insure repeatable results on all materials used in Industry.

Simple face lapping machine capacities

(number of parts per ring)

Double-side lapping machine capacities

(number of parts per satellite)

Assistance & information

We will contact you

Get a call from a LAM PLAN advisor.

Call us

For all your technical or commercial requests


Our social networks

  • Lapping supports
  • Pre-polishing discs
  • Abrasive liquids
  • Polishing supports
  • Diamond polishing liquids
  • Diamond lapping liquids
  • Diamond superfinition products
  • Abrasive liquids

    All rights reserved © LAM PLAN SA 2019
    Made by : CtoutcomStudio

    Contact us

    LAM PLAN SA
    7, rue des Jardins - B.P.15
    74240 Gaillard - France
    header-receiver +33 (0)4 50 43 96 30

    Our dealers