Skip to main content

Polishing machine small series and double-side prototyping for parts: Ø 5 to 20 mm

5,7" touch screen contol panel

Allows you to manage all the parameters of the machine, of the doser (optional) and to save the programs.

Motorised uper plate

Double direction of rotation.

  • Plate Capacity
    Ø 250 mm ext.
    Ø 130 mm int.
  • Useful capacity
    7 satellites Ø 65 mm
  • Plates rotational speed
    20-150 rpm Bidirectional
  • Weight
    95 kg
INTRODUCTION

MASTERLAM® Evolution

In order to answer to double-side polishing issues in small
series or development phase, LAM PLAN proposes the MASTERLAM® Evolution, an original and innovating approach for double-side polishing.

The MASTERLAM® Evolution is a compact and economical solution for double-side polishing, to realise high quality polishing on any kind of small parts. This equipment is particularly well-adjusted for the finishing of watch components in small series, pre-series or prototyping.

The MASTERLAM® Evolution is based on a simple kinematic proposing 2 movements: clock-wise or anti-clockwise rotation of the superior plate and the main cogwheel with speed programming. These 2 movements will allow you to respond to most of your needs in terms of polishing of small series of all types of materials.

VIDEO & VISUALS

Design
and advanced technology

Touch screen control panel

The 5.7 inches’ touch screen in this machine will enable you to manage all the settings: cycle time, rotational speed, rotation movement, pressure during cycle and abrasives distribution sequences. This intuitive screen is also offering you the possibility to save more than 300 operating ranges. A water rinse phase is also possible at the end of the cycle.

  • Lifting and lowering of the superior plate with pneumatic cylinder

    Non-contractual images
    IN DETAIL

    Technical characteristics
    and equipment

    A well-equipped and safe machine

    The MASTERLAM® Evolution outer ring gear is made of 316 L stainless steel, assuring a durability of the moving parts. The machine is also equipped with two FAS® plates facilitating the setting up of the polishing cloths.

    Downloads

    Technical data MASTERLAM® Evolution

    Plate Capacity
    7 carriers track
    Ø 250 mm ext. Ø 130 mm int.
    Useful capacity
    7 satellites Ø 65 mm
    Superior plate rotational speed
    20 to 150 rpm
    Bidirectional rotation
    Cogwheel rotational speed
    20 to 150 rpm
    Bidirectional rotation
    Cogwheel motor power
    0.75 kW
    Superior plate motor power
    0.2 kW
    Pressure
    5 to 400 N
    Required energies
    230 V-50 Hz single-phase
    Compressed air 6 bars filtered 10 µm
    Total power
    2.5 kW
    Noise level
    < 80 db at 1 metre away
    Dim. (W x H x D)
    550 x 670 x 580 mm
    Weight
    95 kg
    Reference
    60ML1EVO00
    ACCESSORIES & OPTIONS

    Available accessories

    • Transparent protective housing
      60 MLEP0 00

      The secured housing is a totally transparent protection compatible with the full range of MASTERLAM®.

      Its opening stops all movements of the machine*, it offers
      an integral protection complying with the 2006/42/ CE and 2004/108/CE standards. The housing’s design preserves the accessibility of the plate and does not clutter the workspace.

      The touch screen is located outside of the secured zone; therefore, the commands are permanently accessible.
      For the MASTERLAM®Evolution, the touch screen control panel is located on the right, a 195 mm space needs to be foreseen in addition to the machine width.

      *However, the transparent secured housing authorises the plate rotation in the manual mode.

      Required space for the MASTERLAM® Evolution :
      Width 770 mm - Height 910 mm.

    • Dosing unit M.M.909 - Peristaltic
      • 3 standard peristaltic pumps
        With an outlet to drive an external pump
      • Control: Touch screen
      • Electrical power supply: 220 V single-phase - 50 Hz
      • Dosing machine communication: 1 x 24 V input for machine servoing.

       Designations
      Qty. Dim. Ref. 
      Dosing unit M.M.909 Adaptable version with a manual start/stop button 1 With 3 glass bottles 500 cc 08 03799 00
      Agitator 1 For glass bottle
      500 cc
      08 02816 00
    • Doseur distributeur M.M.909 HV - Péristaltique
      • Distribution system: 2 standard peristaltic pumps, 1 large flow pump for high viscosity liquids and an outlet to drive an external pump
      • Control: Touch screen
      • Electrical power supply: 220 V single-phase - 50 Hz
      • Dosing machine communication: 1 x 24 V input for machine servoing.

       Designations
      Qty. Dim. Ref. 
      Dosing unit M.M.909 HV 1 With 3 glass bottles 500 cc 08 00799 200
      Agitator 1 For glass bottle
      500 cc
      08 02816 00
    Visuels non contractuels

    Assistance & information

    The health situation makes it necessary to adapt our organization and the activity of our services.

    We will contact you

    Get a call from a LAM PLAN advisor.

    Contact us

    Committed to providing you with quality answers, we invite you to send us a message with your contact details so that our staff can answer you as soon as possible.


    Our social networks

    lam plan société gaillard
    With the support
    La Région Auvergne Rhône-Alpes

    Contact us

    LAM PLAN S.A.S
    7, rue des Jardins - B.P.15
    74240 Gaillard - France
    header-receiver +33 (0)4 50 43 96 30

    Our dealers

    All rights reserved © LAM PLAN S.A.S / Webmaster: Ctoutcom Studio