Skip to main content

Grinding
and pre-polishing discs

The LAM PLAN® abrasive papers & grinding wheels respond to very strict quality standards.

Grinding and pre-polishing discs

Abrasive papers SiC STANDARD

Available from P80 to P4000 from Ø 200 to 400 mm

The LAM PLAN® abrasive papers respond to very strict quality standards. The calibration of the silicon carbide grains is guaranteed for the European standards FEPA regardless of their size (P80 to P4000).

The resistance of the resins used to maintain the abrasive grains gives to the LAM PLAN® abrasive papers a high resistance to heat and moisture. The orientation of the grains is obtained by an electrostatic process. The choice of the support paper (thickness and basis weight) is adapted to the grain’s thickness in order to reduce the wear of the abrasive papers. The paper is made impermeable in its mass and on the surface.

Abrasive papers SiC STANDARD Ø 200 mm

 100 pieces box Self-adhesive Non-adhesive
 Grains FEPA
 Ref. Ref. 
P80 05 60080 20 05 50080 20
P120 05 60120 20 05 50120 20
P180 05 60180 20 05 50180 20
P240 05 60240 20 05 50240 20
P320 05 60320 20 05 50320 20
P400 05 60400 20 05 50400 20
P600 05 60600 20 05 50600 20
P800 05 60800 20 05 50800 20
P1000 05 61000 20 05 51000 20
P1200 05 61200 20 05 51200 20
P2400 05 62400 20 05 52400 20
P4000 05 64000 20 05 54000 20

Abrasive papers SiC STANDARD Ø 250 mm

 100 pieces box Self-adhesive Non-adhesive
 Grains FEPA
 Ref. Ref. 
P80 05 60080 40 05 50080 40
P120 05 60120 40 05 50120 40
P180 05 60180 40 05 50180 40
P240 05 60240 40 05 50240 40
P320 05 60320 40 05 50320 40
P400 05 60400 40 05 50400 40
P600 05 60600 40 05 50600 40
P800 05 60800 40 05 50800 40
P1000 05 61000 40 05 51000 40
P1200 05 61200 40 05 51200 40
P2400 05 62400 40 05 52400 40
P4000 05 64000 40 05 54000 40

Abrasive papers SiC STANDARD Ø 300 mm

 100 pieces box Self-adhesive Non-adhesive
 Grains FEPA
 Ref. Ref. 
P80 05 60080 50 05 50080 50
P120 05 60120 50
05 50120 50
P180 05 60180 50
05 50180 50
P240 05 60240 50
05 50240 50
P320 05 60320 50
05 50320 50
P400 05 60400 50
05 50400 50
P600 05 60600 50
05 50600 50
P800 05 60800 50
05 50800 50
P1000 05 61000 50
05 51000 50
P1200 05 61200 50
05 51200 50
P2400 05 62400 50
05 52400 50
P4000 05 64000 50
05 54000 50

Abrasive papers SiC STANDARD Ø 400 mm

 100 pieces box Self-adhesive Non-adhesive
 Grains FEPA
 Ref. Ref. 
P80 05 60080 80 05 50080 80
P120 05 60120 80
05 50120 80
P180 05 60180 80
05 50180 80
P240 05 60240 80
05 50240 80
P320 05 60320 80
05 50320 80
P400 05 60400 80
05 50400 80
P600 05 60600 80
05 50600 80
P800 05 60800 80
05 50800 80
P1000 05 61000 80
05 51000 80
P1200 05 61200 80
05 51200 80
P2400 05 62400 80
05 52400 80
P4000 05 64000 80
05 54000 80

Abrasive papers SiC EXCELLENCE

Available from P80 to P1200 from Ø 200 to 300 mm

The standard checks of abrasive papers generally manufactured in large quantities are sometimes insufficient to avoid that complete series of discs are outside the standard required by our Metallography laboratory.

LAM PLAN creates the Excellence Range and its double guarantee, every single paper is individually checked before packing.

Abrasive papers SiC EXCELLENCE Ø 200 mm

 50 pieces box Self-adhesive Non-adhesive
 Grains FEPA
 Ref. Ref. 
P80 05 10080 20 05 00080 20
P120 05 10120 20 05 00120 20
P180 05 10180 20 05 00180 20
P240 05 10240 20 05 00240 20
P320 05 10320 20 05 00320 20
P400 05 10400 20 05 00400 20
P600 05 10600 20 05 00600 20
P1200 05 11200 20 05 01200 20

Abrasive papers SiC EXCELLENCE Ø 250 mm

 50 pieces box Self-adhesive Non-adhesive
 Grains FEPA
 Ref. Ref. 
P80 05 10080 40 05 00080 40
P120 05 10120 40
05 00120 40
P180 05 10180 40
05 00180 40
P240 05 10240 40
05 00240 40
P320 05 10320 40
05 00320 40
P400 05 10400 40
05 00400 40
P600 05 10600 40
05 00600 40
P1200 05 11200 40
05 01200 40

Abrasive papers SiC EXCELLENCE Ø 300 mm

 50 pieces box Self-adhesive Non-adhesive
 Grains FEPA
 Ref. Ref. 
P80 05 10080 50 05 00080 50
P120 05 10120 50
05 00120 50
P180 05 10180 50
05 00180 50
P240 05 10240 50
05 00240 50
P320 05 10320 50
05 00320 50
P400 05 10400 50
05 00400 50
P600 05 10600 50
05 00600 50
P1200 05 11200 50
05 01200 50

Grinding wheels for RECTILAM®2.0

LAM PLAN grinding wheels are used to dress samples in high speed automatic prepolishing machines.
Two types available: AL2O3 grain 60 and SiC grain 150.

Grinding wheels AL2O3 - Grain 60

05 M0060 80

For grinding of soft, ductile materials
Lubricant: water
Ø 355 mm

Grinding wheels SiC - Grain 150

05 M0150 80

For grinding of all materials >HV200
Lubricant: water
Ø 355 mm

Guidance

The patented FAS®2 system is the indispensable accessory when using self-adhesive discs. The FAS®2 is a support disc which allows easy positioning and unsticking of self-adhesive abrasive papers on all machines.

 Grain sizes
FEPA standard 80 120 180 240 320 400 600 800 1000 1200 2400 4000
Grains Ø (microns) 201 125 82 59 46 35 26 22 18 15 10 5

Assistance & information

The health situation makes it necessary to adapt our organization and the activity of our services.

We will contact you

Get a call from a LAM PLAN advisor.

Contact us

Committed to providing you with quality answers, we invite you to send us a message with your contact details so that our staff can answer you as soon as possible.


Our social networks

lam plan société gaillard
With the support
La Région Auvergne Rhône-Alpes

Contact us

LAM PLAN S.A.S
7, rue des Jardins - B.P.15
74240 Gaillard - France
header-receiver +33 (0)4 50 43 96 30

Our dealers

All rights reserved © LAM PLAN S.A.S / Webmaster: Ctoutcom Studio