Skip to main content
Follow us on our social networks

Large diameter, automatic polishing machine with central pressure and motorised oscillating head

5,7″ touch screen

User friendly interface.
Memorization of programs, integrating up to 8 steps.

Central pressure head

With motorised oscillation fonction

Large capacity

Ø of the plate
from 350 to 400 mm

  • Ø plates capacity
    400 mm
  • Plate rotation speed
    20 to 650 rpm
  • Capacity
    Sample size 6 X Ø 60 mm
  • Programming
    60 storable programs
INTRODUCTION

MASTERLAM®1.1

Automatic single-plate Ø 350 to 400 mm polishing machine, bidirectional rotation and variable speed.

The MASTERLAM®1.1 is a central pressure machine. It is equipped with a 2,2 Kw main motor, a 250 W head motor and applicable pressure may reach 450 N.

Using the oscillating head allows you to make use the entire surface of the 350 or 400 mm diameter plate: the quality of flatness is improved, stock removal is increased and the service life of polishing supports is increased (uniform wear due to use of the entire surface of the plate.)

The specific capacities of the MASTERLAM®1.1 allow it to cope with most difficult applications, particularly in terms of large polishing surfaces where the torque and required pressure exceed the capabilities of standard equipment.

VIDEO & VISUALS

Design
and advanced technology

Possibility of changing parameters while the machine is working: pressure, speed, time and dosage (except the rotation.)

DISTRILAM dosing unit programming integrated to the machine’s commands in the full range of MASTERLAM® machines.

Touch screen (5,7“)

Protection system (Accessories)

    Non-contractual wp-content/uploads
    IN DETAIL

    Technical characteristics
    and equipment

    • Oscillation function
    • Stock removal control system

    Downloads

    Technical data MASTERLAM®1.1

    Plates capacity

    Ø 400 mm

    Body
    Steel coated with epoxy paint
    Bowl
    Removable, in resin, to ease cleaning
    Controls
    Touch screen (5,7“)
    Plate rotation speed
    Variable from 20 to 650 rpm
    Bidirectional rotation
    Head’s speed
    Variable from 10 to 150 rpm
    Bidirectional rotation
    Applicable load
    5 to 450 N central pressure
    Capacity
    Sample size 6 X Ø 60 mm
    Oscillating head (option)
    Adjustable speed and amplitude
    Workspace lightening
    LED
    Water inlet
    Removable pipe, with flow rate adjustment and safety solenoid valve
    Programming
    60 storable programs, USB connector to backup programs and Ethernet port for networking
    Motor power
    2.2 kW
    Head motor power
    250 W
    Voltage
    230 V – 50 Hz single phase (25A)
    Pneumatic feed
    6 bars
    Dim. W x H x D
    800 x 670 x 712 mm
    Weight
    110 kg
    Reference
    60 ML110 00
    ACCESSORIES & OPTIONS

    Available accessories

    Dosing unit DISTRILAM®
    60 MLD00 00

    The automatic dosing unit DISTRILAM® is directly controlled via the touch screen on the machine through a RS 232 connector. It is instantly recognised by all the MASTERLAM® polishing devices as the control program is already programmed in the machines.

    Transparent protective housing
    60 MLEP1 00

    The secured housing is a totally transparent protection compatible with the full range of MASTERLAM®.

    Its opening stops all movements of the machine*, it offers an integral protection complying with the 2006/42/ CE and 2004/108/CE standards. The housing’s design preserves the accessibility of the plate and does not clutter the workspace.
    The touch screen is located outside of the secured zone; therefore, the commands are permanently accessible.

    For the MASTERLAM®1.0 and 3.0 the touch screen control panel is located on the right, a 195 mm space needs to be foreseen in addition to the machine width.

    *However, the transparent secured housing authorises the plate rotation in the manual mode.

    Required space for the MASTERLAM®1.1:
    Width 880 mm – Height 910 mm

    Aluminium plates
    08 8270600

    Aluminium plate Ø 400 mm

    CP sample holder
    06 MLC01 00

    Ø 210 mm without cavity

    Sample holder for irregular parts
    06 MLC60 00

    Ø 160 mm central pressure sample holder for eccentric restriction of non-embedded complex geometric parts.

    Levelling plate for CP sample holder
    06MLP0100

    Ø 160 mm – 3 mm depth

    Sedimentation 60 L tank
    60 A00299 00

    With pump controlled by the machine.

    Non-contractual wp-content/uploads

    Assistance & information

    Contact us

    Committed to providing you with quality answers, we invite you to send us a message with your contact details so that our staff can answer you as soon as possible.


    Our social networks

    lam plan société gaillard
    With the support
    La Région Auvergne Rhône-Alpes

    Contact us

    LAM PLAN S.A.S
    7, rue des Jardins - B.P.15
    74240 Gaillard - France
    header-receiver +33 (0)4 50 43 96 30

    Our dealers

    All rights reserved © LAM PLAN S.A.S / Webmaster: Ctoutcom Studio