Skip to main content
Follow us on our social networks

METALLOGRAPHY

Faced with the constant evolution of the materials and the quality standards, LAM PLAN is a reference partner for the preparation of the samples for the metallographic analysis.

Our technical solutions and our customised methods will ensure you reliable and reproducible results. We are fully committed to the quality of the samples.

The LAM PLAN test laboratory will guarantee you a response adapted to your needs in surface preparation. This service relies on our range of innovative products and our in-depth experience of the various polishing and super finish trades.

METALLOGRAPHY

Cutting

Metallographically cutting off the part allows not only sampling the material, but also observing the material’s structure at a specific spot.

The preparation of metallographic samples requires a precision cutting off in a wide variety of materials.

A good lubrication is necessary to cool the cutting wheel and prevent the burning of the parts. In addition, the environment of a metallography laboratory imposes cleanliness and safety criteria to which your cut-off equipment must comply.

METALLOGRAPHY

Mounting

Embedding allows limiting edge stresses during the polishing step. This operation will also allow you:

  • In manual polishing: to facilitate the holding of the sample
  • In automatic polishing: to place several samples together in a sample holder under optimum tightening conditions.

Assistance & information

Contact us

Committed to providing you with quality answers, we invite you to send us a message with your contact details so that our staff can answer you as soon as possible.


Our social networks

lam plan société gaillard
With the support
La Région Auvergne Rhône-Alpes

Contact us

LAM PLAN S.A.S
7, rue des Jardins - B.P.15
74240 Gaillard - France
header-receiver +33 (0)4 50 43 96 30

Our dealers

All rights reserved © LAM PLAN S.A.S / Webmaster: Ctoutcom Studio