Accessories for polishing machines
Plates & supports, sample holders, accessories & distibutors…
![Accessories for polishing machines](/wp-content/themes/yootheme/cache/bc/lamplan-metallographie-accessoiresmachines-vignettecategorie-bc077f54.png)
Plates & supports
![](/wp-content/themes/yootheme/cache/a8/lamplan-accessoire-polissage-plateaualuminium-a84a2964.png)
Aluminium plates
For machines SMARTLAM®2.0 & 3.0
Aluminium plate Ø 200 mm | 08 82701 00 | ||
Aluminium plate Ø 230 mm | 08 82702 00 |
For machines SMARTLAM®2.0 & 3.0, MASTERLAM®1.0 & 3.0
Aluminium plate Ø 250 mm | 08 82703 00 | ||
Aluminium plate Ø 300 mm | 08 82704 00 |
For machine MASTERLAM®1.1
Aluminium plate Ø 400 mm | 08 82706 00 |
![](/wp-content/themes/yootheme/cache/b2/lamplan-accessoire-polissage-cerclages-b2484c9b.png)
Metal clamping rings
For machines SMARTLAM®2.0 & 3.0
For Ø 200 mm plate | 60 SL002 90 | ||
For Ø 230 mm plate | 60 SL001 90 |
For machines SMARTLAM®2.0 & 3.0, MASTERLAM®1.0 & 3.0
For Ø 250 mm plate | 60 SL004 90 | ||
For Ø 300 mm plate | 60 SL006 90 | ||
For Ø 305 mm plate | 60 SL007 90 |
![](/wp-content/themes/yootheme/cache/75/lamplan-accessoire-polissage-reducteursdecuve-75c0477b.png)
Tank reducers SMARTLAM®
For machines SMARTLAM®2.0 & 3.0
For Ø 200 mm plate | 60 ML080 90 | ||
For Ø 230 mm plate | 60 ML082 90 |
For machines SMARTLAM®2.0 & 3.0, MASTERLAM®1.0 & 3.0
For Ø 250 mm plate | 60 ML081 90 |
![](/wp-content/themes/yootheme/cache/43/lamplan-accessoire-polissage-collerette-43a04984.png)
Anti-splash rings
For machines SMARTLAM®2.0, MASTERLAM®1.0 & 3.0
Sample holders and accessories
![](/wp-content/themes/yootheme/cache/af/lamplan-accessoire-polissage-portechantillonspc-aff9a4af.png)
CP sample holder
For machine SMARTLAM®2.0 with SPRINGLAM®
PC Ø 119 mm with 6 x Ø 20 to 32 mm water drop cells | 06 MLP02 00 |
For machine SMARTLAM®2.0 with SPRINGLAM®
For machines MASTERLAM®1.0 and 3.0
PC Ø 160 mm with 6 x Ø 20 to 40 mm water drop cells | 06 MLC10 00 | ||
PC Ø 160 mm with 9 x Ø 30 mm water drop cells | 06 MLC30 00 | ||
PC Ø 160 mm with 6 x Ø 40 mm water drop cells | 06 MLC40 00 | ||
PC Ø 160 mm with 5 x Ø 50 mm water drop cells | 06 MLC50 00 | ||
PC Ø 160 mm with 3 x rectangular 40 x 70 mm | 06 MLC12 00 | ||
PC Ø 160 mm with 6 x rectangular 25 x 34 mm | 06 MLC14 00 |
For machine MASTERLAM®1.1
PC Ø 210 mm without cavity | 06 MLC01 00 |
![](/wp-content/themes/yootheme/cache/c9/lamplan-accessoire-polissage-portechantillonsp-c9249f5a.png)
IP sample holder
For machine MASTERLAM®3.0
IP Ø 160 mm with 6 x Ø 50 mm water cells | 06 MLI10 00 |
![](/wp-content/themes/yootheme/cache/86/lamplan-accessoire-polissage-porte_chantillon_excentrique-86af9fe5.png)
Sample holder for complex geometric parts
06 MLC60 00
For machine MASTERLAM®1.0, 1.1 and 3.0
Ø 160 mm central pressure sample holder for eccentric restriction of non-embedded complex geometric parts.
![](/wp-content/themes/yootheme/cache/ef/lamplan-pe128-det-ef74abbb.png)
PE128 precision sample holder for thin slides
06 PE128 00
For machine M.M.8400
The LAM PLAN PE128 specimen holder is used to hold several thin blades, by vacuum suction, during a lapping operation.
This sample holder guarantees a high level of parallelism. The precision and robustness of this device enable it to meet the specific demands of research laboratories and the constraints of production laboratories alike.
Adjustable thin-slide thickness and automatic parallelism.
Set includes
- 1 micrometer ruler
- 1 vacuum pump
- 1 Ø 120 mm sample holder.
Compatible thin blades: 6x 30×45 or 6x 28×48 – 1x 120×45 + 2x 28×48 (or 2x 30×45) 1x 120×90 – 1x 60×80 + 2x 28×48 (or 2x30x45) – 2x 60×80 – 4x 24×27 – 4x Ø1inch.
Technical specifications
- Adjustment ring accuracy: 200 µm per revolution
- Usable internal diameter: 128 mm
- Dimensions (H x Ø): 210 x 144 mm
- Weight : 6,27 kg
![](/wp-content/themes/yootheme/cache/00/lamplan-accessoire-polissage-platinedechargement-00c1d007.png)
Levelling plates for CP sample holder
For machine SMARTLAM®2.0 with SPRINGLAM®
For machine SMARTLAM®3.0
CP Ø 160 mm – 3 mm depth | 06 MLP01 00 | ||
CP Ø 119 mm – 3 mm depth | 06 MLP02 00 |
![](/wp-content/themes/yootheme/cache/2c/lamplan-metallographie-enrobage-baguesreductrices-det-2c82f9c7.png)
Reducer rings
For machine MASTERLAM®3.0
Kit 6 x Ø 40 mm reducer rings | 06 MLIK5 00 | ||
Kit 6 x Ø 30 mm reducer rings | 06 MLIK2 00 | ||
Kit 6 x Ø 25,4 mm reducer rings | 06 MLIK1 10 | ||
Kit 6 x 1-1/4 reducer rings | 06 MLIK3 10 | ||
Kit 6 x 1-1/2″ reducer rings | 06 MLIK4 10 |
For machine SMARTLAM®3.0
Kit 3 x Ø 40 mm reducer rings | 06 SLIK5 00 | ||
Kit 3 x Ø 30 mm reducer rings | 06 SLIK2 00 | ||
Kit 3 x Ø 25,4 mm reducer rings | 06 SLIK1 10 | ||
Kit 3 x 1-1/4 reducer rings | 06 SLIK3 10 | ||
Kit 3 x 1-1/2″ reducer rings | 06 SLIK4 10 |
Dosing units
![](/wp-content/themes/yootheme/cache/4c/lamplan-accessoire-polissage-distrilam-4cd84d5d.png)
Dosing unit DISTRILAM®
For machines MASTERLAM®1.0, 3.0 & 1.1
The automatic dosing unit DISTRILAM® is directly controlled via the touch screen on the machine through a RS 232 connector. It is instantly recognised by all the MASTERLAM® polishing devices as the control program is already programmed in the machines. It is equipped with 4 circuits composed of 3 standard peristaltic pumps for an accurate dosage of diamond liquids, and 1 high flow rate peristatic pump for the dosage of the lubricant or the colloidal silica abrasive. It works without compressed air nor electric wiring. The automatic dosing unit DISTRILAM® is an indispensable accessory for an automatic use of the MASTERLAM®.
This device is the guarantee of a reproducible process and an economic use of the fluids.
It contains: a dosing unit, a machine connection, a 4 ways distribution nozzle on magnetic leg and 4 plastic bottles.
Dimensions W x H x D : 170 x 205 x 200 mm
![](/wp-content/themes/yootheme/cache/97/lamplan-accessoire-polissage-mm909m-97b49958.png)
Dosing unit M.M.909 M
For machine SMARTLAM®2.0 with SPRINGLAM®
For machine SMARTLAM®3.0
- Distribution of 3 different liquids
- Controls:Touch screen
- 3 peristaltic pumps, with 1 outlet to drive an external pump
- Electrical power supply: 230 v single-phase 50 Hz
- Dosing / machine communication: 1 x 24 V input for machine servoing
- Option : Replacement of a standard peristaltic pump by a high flow rate pump for high-viscosity products
Compressor
![](/wp-content/themes/yootheme/cache/cf/lamplan-accessoire-polissage-compresseur-cfb39204.png)
Diaphragm compressor
Diaphragm compressor for laboratories that are not equipped with a compressed air network. Silent operating.
Flow |
Pressure |
Dim. W x H x D |
Ref. |
50 l/min | 8 bar | 330 x 500 x 330 mm | 60 COM00 00 |
Pressure regulator filter
![](/wp-content/themes/yootheme/cache/aa/lamplan-accessoire-polissage-kitfiltreair-det-aaa3d673.png)
Pressure regulator filter kit for compressed air
Indispensable to preserve the machines from impurities.
Compatible with: CUTLAM®4.0 & CUTLAM®5.0, PRESSLAM®1.1, SMARTLAM®3.0, MASTERLAM®1.0/1.1/3.0.
Universal sample-holder mould
![](/wp-content/themes/yootheme/cache/a6/lamplan-metallographie-enrobage-moule610universel-det-a69647d1.png)
Universal sample-holder mould Serie 610
The LAM PLAN universal sample-holder mould is a smart and economical system which combines the functions of both mounting mould and sample-holder for cold mounting processes using any kind of liquid resin. This system has been developed as two removable parts: the metallic universal sample-holder with non-stick coating and a special silicon based flexible mould to embed your cold mounting samples.
Use
The 610 sample holder can be used on both automatic and semi-automatic machines. It is directly compatible with the SMARTLAM®2.0 fitted with the SPRINGLAM® pressure arm. An adaptor kit is available for use with an automatic machine with motorised head.
Type |
SMARTLAM® 2.0 option SPRINGLAM® |
MASTERLAM® 1.0 MASTERLAM®3.0 |
Ref. |
Ø 110 mm with 6 x Ø 28 mm cells | Ø 200 mm | 06 00612 20 | |
Ø 145 mm 3 moulds 6 included cells 6 x Ø 40, 6 x Ø 35 and 6 x Ø 32 mm |
Ø 250 – 300 mm |
Ø 250 – 300 mm |
06 00614 10 |
Ø 145 mm with 3 moulds 6 included cells 6 x Ø 30, 6 x Ø 25 and 6 x Ø 20 mm | Ø 250 – 300 mm |
Ø 250 – 300 mm |
06 00614 20 |
Ø 145 mm with moulds 3 x Ø 50 mm cells | Ø 250 – 300 mm |
Ø 250 – 300 mm |
06 00614 30 |
Ø 145 mm with 2 moulds 3 included rectangular cells 3 x 30 x 55 mm and 3 x 18 x 55 mm | Ø 250 – 300 mm |
Ø 250 – 300 mm |
06 00614 40 |
Ø Ø 159 mm with mould 6 x Ø 36 mm cells | Ø 250 – 300 mm |
Ø 250 – 300 mm |
06 00612 40 |
Ø 159 mm with mould 10 x Ø 28 mm cells | Ø 300 mm | Ø 300 mm | 06 00612 50 |
Universal sample holder ADAPTOR KIT for MASTERLAM®1.0 and 3.0 |
X | 06 K0010 00 |
In order to use the universal sample-holders with the SMARTLAM®2.0, the machine must be fitted with a SPRINGLAM® pressure arm.
The universal sample-holders are not compatible with the individual pressure.
Transparent protective housing
![](/wp-content/themes/yootheme/cache/2b/lamplan-accessoire-polissage-capottransparent-2b948843.png)
Transparent protective housing forMASTERLAM® range
The secured housing is a totally transparent protection compatible with the full range of MASTERLAM®. Its opening stops all movements of the machine*, it offers
an integral protection complying with the 2006/42/ CE and 2004/108/CE standards.
The housing’s design preserves the accessibility of the plate and does not clutter the workspace.
The touch screen is located outside of the secured zone; therefore, the commands are permanently accessible.
*However, the transparent secured housing authorises the plate rotation in the manual mode.
For machines MASTERLAM®1.0 & 3.0
For the MASTERLAM®1.0 and 3.0 the touch screen control panel is located on the right, a 195 mm space needs to be foreseen in addition to the machine width.
Space: width 770 mm, height 910 mm | 60 MLEP0 00 |
For machine MASTERLAM®1.1
Space: width 880 mm, height 910 mm | 60 MLEP1 00 |
Sedimentation tanks
![](/wp-content/themes/yootheme/cache/f1/lamplan-accessoire-polissage-bacsedimentation-f191e659.png)
Sedimentation 60 L tank
60 A0029 90
For machines MASTERLAM®1.0, 3.0 & 1.1
![](/wp-content/themes/yootheme/cache/f1/lamplan-accessoire-polissage-bacsedimentation-f191e659.png)
Sedimentation 60 L tank + pump
60 A0029 00
For machines MASTERLAM®1.0, 3.0 & 1.1
With pump controlled by the machine.