Skip to main content
Follow us on our social networks

Lapping & polishing machine for variable production of small parts: Ø 5 to 130 mm

Plate Ø 381 mm

Many supports available, NEW LAM M’M’ plates, CAST IRON plates, TOUCHLAM® polishing discs …

Benchtop machine

Compact and versatile.

Touch screen

Storage of parameters, time and speeds.

  • Plate Ø
    381 mm
  • Plate rotation speed
    from 30 to 90 rpm
  • Inner ring Ø
    138 mm
  • Weight
    70 kg
INTRODUCTION

M.M.8400

The M.M.8400 machine is both lapping and polishing equipment which enable you to integrate a means of flat surface finishing into your workshop, at a reasonable price.
Its compact size and ergonomic controls facilitate it installation and use.

The simple tried and tested design, equipped with medium dimension plates, enables you to cost effectively produce small runs.

Equipped with either a cast iron plate, DIALAM®, LAM PLAN M’M’ or FAS®, this range of machines lets you achieve any type of surface finish defined by your specification (e.g. lapping, stock removal, grinding, polishing etc.)

The process is controlled via a touchscreen, which ensures good ergonomic and intuitive use. This range of machines also gives you the possibility of saving programmes, assuring repeatability of lapping/polishing processes implemented in your workshops.

This range of machines is compatible with the new LAM PLAN 709, 710, and 719 distribution systems managed directly from the machine’s control panel.

VIDEO & VISUALS

Design
and advanced technology

Its also perfectly suited to your maintenance operations on all seal parts (e.g. safety valves or small mechanical parts lapping).

M.M.8400 equipped with the new dosing unit M.M.709

M.M.8400 equipped with the dosing unit M.M.909

Example of applications: lapping of impressions for stamping

Example of applications: mixing plate

    Non-contractual wp-content/uploads
    IN DETAIL

    Technical characteristics
    and equipment

    These machines can be equipped with the patented NEW LAM® M’M’plates. The various proposed accessories (dosing unit, FAS® plates, polishing cloths….) allow adapting the basic machine to all specific applications (micromechanics, watchmaking industry, electronics, etc.)

    Downloads

    Technical data M.M.8400

    Plate Ø
    381 mm
    Inner ring Ø
    138 mm
    Capacity per ring
    1 part Ø130 mm or 170 parts Ø 5 mm
    Number of rings
    3
    Electric power supply
    230 V single-phase
    Motor Power
    0.37 kW
    Control
    Analog button in front of the machine
    Plate rotation speed
    From 30 to 90 rpm
    Dim. (W x H x D)
    625 x 725 x 450 mm
    Weight (without plate)
    70 kg
    Abrasive distribution system
    Included
    Type depending on the plate
    Reference
    10 08400 00
    ACCESSORIES & OPTIONS

    Available accessories

    Dosing unit type 709
    08 01709 00

    Peristaltic model dedicated to LAM PLAN machines.

    • Capacity : 2 x 500 cc including 1 with agitator
    • Electric power supply : 220V single phase + 24 V input for control
    • Pump flow rate : 0,5 ml/seconde
    • Distribution system : nozzles not included
    Dosing unit type 710
    08 01710 00

    Peristaltic model dedicated to LAM PLAN machines, recommended for oil-based products.

    • Capacity : 2 x 500 cc including 1 with agitator
    • Electric power supply : 220V single phase + 24 V input for control
    • Pump flow rate : 0,5 ml/seconde
    • Distribution system : nozzles not included
    Dosing unit type 719
    08 01719 00

    Venturi model dedicated to LAM PLAN machines.

    • Capacity : 2 x 500 cc including 1 with agitator
    • Electric power supply : 220V single phase + 24 V input for control
    • Pump flow rate : N.C.
    • Distribution system : nozzles not included
    Autonomous dosing unit M.M.909 – Peristaltic
    • Distribution system: 3 standard peristaltic pumps with an outlet to drive an external pump
    • Control: Touch screen
    • Electrical power supply: 220 V single-phase – 50 Hz
    • Dosing machine communication: 1 x 24 V input for machine servoing

     Designation
    Qty. Dim. Ref. 
    Dosing unit M.M.909
    ADAPTABLE VERSION
    With a manual start/stop button
    1 with 3 glass bottles 500 cc 08 03799 00
    Stirrer 1 for glass bottle 500 cc 08 02816 00
    Autonomous dosing unit M.M.909 HV – Peristaltic
    • Distribution system: 2 standard peristaltic pumps, 1 large flow pump for high viscosity liquids and an outlet to drive an external pump
    • Control: Touch screen
    • Electrical power supply: 220 V single-phase – 50 Hz
    • Dosing machine communication: 1 x 24 V input for machine servoing

     Designation
    Qty. Dim. Ref. 
    Dosing unit M.M.909 HV 1 with 3 glass bottles 500 cc 08 00799100
    Stirrer 1 for glass bottle 500 cc 08 02816 00
    Support cabinet
    10 M8400 00

    Height: 73 cm
    1 door
    3 compartments

    MESUREO: Stock removal measurement
    10 84003 00

    A system enabling obtention of flat surfaces at less than one micron, combined with a parallelism of quality between the lapped face and a reference.
    The MESUREO is comprised of a perfectly flat pressure disc, which is able to transpose on a vertical axis, therefore producing pressure on the opposite face of the surface to be lapped.
    The pressure plate is guided by a high precision ball bearing socket. Also, at the end of the polishing cycle, the parts contained by this tool will have a parallelism inferior to 5 microns.

    The pressure surface is ceramic, assuring a long life, with no risk of metallic contamination. Finally, this tool is equipped with a wireless sensor, allowing visualisation of material removal in real time on a PC placed next to the lapping machine to which this device is connected.

    The target dimension can be programmed. Therefore, the operator, via an intuitive colour range on the monitor, can instantly visualise whether or not the parts are within the defined thickness tolerance.

    Anneaux d’autorodage fonte

    Des fontes spécifiques de haute qualité sélectionnées par nos soins pour des résultats optimums et durables. Adaptables sur toutes les machines à roder, quelles qu’en soient la marque et la taille. Disponibles sur stock ou réalisés à la demande.

    Ø en mm Qté Réf. 
    Ext. Int.
    178 140 1 U178 A0381
    Anneaux d’autorodage céramique SPYLAP®

    Prévenez les problèmes de déformation mécanique. Les anneaux céramique vous permettent de préserver la planéité des plateaux, de maîtriser leur échauffement, tout en limitant la pollution grâce à l’absence de graphite.

    Le détecteur SPYLAP® permet à l’utilisateur de prévenir visuellement une déformation mécanique trop importante du support de rodage (ou de polissage) et des pièces à roder. Le SPYLAP® capte en permanence la température du support et il passe du noir au rouge à une température précise prédéfinie.

    Ø en mm Qté Réf. 
    Ext. Int.
    182 140 1 08 83562 10
    Anneaux plastique
    Ø en mm Qté Réf. 
    Ext. Int.
    182 140 1 08 83512 00
    Non-contractual wp-content/uploads

    Assistance & information

    Contact us

    Committed to providing you with quality answers, we invite you to send us a message with your contact details so that our staff can answer you as soon as possible.


    Our social networks

    lam plan société gaillard
    With the support
    La Région Auvergne Rhône-Alpes

    Contact us

    LAM PLAN S.A.S
    7, rue des Jardins - B.P.15
    74240 Gaillard - France
    header-receiver +33 (0)4 50 43 96 30

    Our dealers

    All rights reserved © LAM PLAN S.A.S / Webmaster: Ctoutcom Studio