Skip to main content
Follow us on our social networks

Composite abrasives

Abrasive compounds, liquids, pastes & powder, BIOLAM®, AQUA LAM®, BIOJET plus, BIOLAP®

aqualam lam plan composite abrasives

CLASSICAL composite abrasives

Lapping on cast iron plates

A high-performance product which has proven its adaptability to all usage, especially for large tanks and intensive usage. According to the concentration intended, 1 litre of abrasive solution allows obtaining between 5 and 10 litres of abrasive.

Advantages

– Increasing working speed.
– Easy resuspension of the mixture.
– Soft abrasive film, efficient and balanced.
– Very low smell.
– Low running costs.
– Easy cleaning. Detergent 711-103.
– Ingenious packaging: packs 2 x 2 liters stackable and 4 x 2 liters (reduced handling).

Concentrated abrasive slurry, easy-to-use and easy cleaning.

1 pack of 2 x 2 liters = 20 to 30 liters of solution. These products allow working with abrasive concentration adjustable to usage. Requiring a brewing while using it. Easy resuspension. Compatible with the additive 716.

CLASSICAL composite abrasive Aluminium Oxide (AI2O3)

The CLASSICAL composite abrasive is also available in Boron carbide (B4C) and cerium oxide (CeO2). Other grains on demand.

    Pack 2 x 2 L Pack 4 x 2 L 
FEPA
µm Ref.  Ref. 
180 74 A074 S12L2 A074 S12L4
220 62 A062 S12L2 A062 S12L4
240 45 A045 S12L2 A045 S12L4
280 37 A037 S12L2 A037 S12L4
320 29 A029 S12L2 A029 S12L4
360 23 A023 S12L2 A023 S12L4
400 17 A017 S12L2 A017 S12L4
500 13 A013 S12L2 A013 S12L4
600 9 A009 S12L2 A009 S12L4
800 7 A007 S12L2 A007 S12L4
1000 5 A005 S12L2 A005 S12L4
1200 3 A003 S12L2 A003 S12L4
1500  1 A001 S12L2 A001 S12L4

CLASSICAL composite abrasive Silicon carbide (SIC)

The CLASSICAL composite abrasive is also available in Boron carbide (B4C) and Cerium oxide (CeO2). Other grains on demand.

    Pack 2 x 2 L Pack 4 x 2 L 
FEPA
µm Ref.  Ref. 
180 74 E074 S12L2 E074 S12L4
220 62 E062 S12L2 E062 S12L4
240 45 E045 S12L2 E045 S12L4
280 37 E037 S12L2 E037 S12L4
320 29 E029 S12L2 E029 S12L4
360 23 E023 S12L2 E023 S12L4
400 17 E017 S12L2 E017 S12L4
500 13 E013 S12L2 E013 S12L4
600 9 E009 S12L2 E009 S12L4
800 7 E007 S12L2 E007 S12L4
1000 5 E005 S12L2 E005 S12L4
1200 3 E003 S12L2 E003 S12L4

BIOLAM® composite abrasives

Conventional abrasive
Lapping on cast iron plate
Biodegradable

A new generation of biodegradable abrasive slurries developed by our Research and Development services. Very useful for the lapping machine equipped with a medium size tank.

Advantages

– Easy to use and to put in work.
– Low decantation of the abrasive, regularity of results.
– Consistent and ready abrasive film.
– No dangerous substances.
– Low running costs.
– Very low smell.
– Simple and easy cleaning (ex: water or water + ordinary detergent).
– Compact packaging: 2 and 20 litres jerrycans other packaging on demand.

BIOLAM®PLUS to dilute and BIOLAM S ready-to-use

Plus: Smooth abrasive slurry, no smell, biodegradable, easy to clean. Limited decantation, no additive needed. dilute 1 to 5 times in water.

S: Biodegradable and no smell liquid slurry, non-toxic.
Easy to clean. Simple usage: to put directly in the abrasive tank of the machine, limited decantation.
Depending of the use can be used pure or can be diluted up to 2 times in water.

 

BIOLAM®PLUS to dilute Aluminium oxide (AI2O3)

    Can 2 L Can 20 L 
FEPA
µm Ref.  Ref. 
100 125 A125 V92L1 A125 V9020
120 105 A105 V92L1 A105 V9020
150 88 A088 V92L1 A088 V9020
180 74 A074 V92L1 A074 V9020
220 62 A062 V92L1 A062 V9020
240 45 A045 V92L1 A045 V9020
280 37 A037 V92L1 A037 V9020
320 29 A029 V92L1 A029 V9020
360 23 A023 V92L1 A023 V9020
400 17 A017 V92L1 A017 V9020
500 13 A013 V92L1 A013 V9020
600 9 A009 V92L1 A009 V9020
800 7 A007 V92L1 A007 V9020
1000 5 A005 V92L1 A005 V9020
1200 3 A003 V92L1 A003 V9020
1400 2 A002 V92L1 A002 V9020
1500 1 A001 V92L1 A001 V9020
2000 0,4 CP40 V92L1  
2200 0,2 CP20 V92L1  
4500 0,05 CP05 V92L1  

BIOLAM®S ready-to-use Aluminium oxide (AI2O3)

    Can 2 L Can 20 L 
FEPA
µm Ref.  Ref. 
150 88 A088 V62L1 A088 V6020
180 74 A074 V62L1 A074 V6020
220 62 A062 V62L1 A062 V6020
240 45 A045 V62L1 A045 V6020
280 37 A037 V62L1 A037 V6020
320 29 A029 V62L1 A029 V6020
360 23 A023 V62L1 A023 V6020
400 17 A017 V62L1 A017 V6020
500 13 A013 V62L1 A013 V6020
600 9 A009 V62L1 A009 V6020
800 7 A007 V62L1 A007 V6020
1000 5 A005 V62L1 A005 V6020
1200 3 A003 V62L1 A003 V6020
1500 1 A001 V62L1 A001 V6020
2000 0,4 CP40 V62L1 CP40 V6020
2200 0,2 CP20 V62L1 CP20 V6020
4500 0,05 CP05 V62L1 CP05 V6020

BIOLAM®PLUS to dilute Silicon carbide (SIC)

    Can 2 L Can 20 L 
FEPA
µm Ref.  Ref. 
80 177 E177 V92L1 E177 V9020
100 125 E125 V92L1 E125 V9020
120 105 E105 V92L1 E105 V9020
180 74 E074 V92L1 E074 V9020
220 62 E062 V92L1 E062 V9020
240 45 E045 V92L1 E045 V9020
280 37 E037 V92L1 E037 V9020
320 29 E029 V92L1 E029 V9020
360 23 E023 V92L1 E023 V9020
400 17 E017 V92L1 E017 V9020
500 13 E013 V92L1 E013 V9020
600 9 E009 V92L1 E009 V9020
800 7 E007 V92L1 E007 V9020
1000 5 E005 V92L1 E005 V9020
1200 3 E003 V92L1 E003 V9020

BIOLAM®S ready-to-use Silicon carbide (SIC)

    Can 2 L Can 20 L 
FEPA
µm Ref.  Ref. 
80 177 E177 V62L1 E177 V6020
100 125 E125 V62L1 E125 V6020
120 105 E105 V62L1 E105 V6020
150 88 E088 V62L1 E088 V6020
180 74 E074 V62L1 E074 V6020
220 62 E062 V62L1 E062 V6020
240 45 E045 V62L1 E045 V6020
280 37 E037 V62L1 E037 V6020
320 29 E029 V62L1 E029 V6020
360 23 E023 V62L1 E023 V6020
400 17 E017 V62L1 E017 V6020
500 13 E013 V62L1 E013 V6020
600 9 E009 V62L1 E009 V6020
800 7 E007 V62L1 E007 V6020
1000 5 E005 V62L1 E005 V6020
1200 3 E003 V62L1 E003 V6020
1360 1,5 F1P5 V62L1 F1P5 V6020
1500 1 F001 V62L1 F001 V6020
1800 0,7 FP70 V62L1 FP70 V6020

BIOLAM®PLUS Cerium oxide (CeO2)

Finishing Liquid for the finishing on glass, sapphire and plastic.
Dilute 2 to 5 times in water.

    Can 2 L 
FEPA
µm Ref. 
1200 3 I003 V92L1
1300 2 I002 V92L1
1400 1 I001 V92L1

AQUA LAM® colloidal silica

Super-finishing
Simplified cleaning

The colloidal silicas are stabilised suspensions with fine non-agglomerated spherical
particles. This aqueous solution contains a high concentration of nanoscale silica.
During usage, colloidal silicas are generally diluted in water to proportions between 10 and 50%. We advise a 20% dilution in water for an optimum use.

These products are always used for super-finishing.

AQUA LAM® colloidal silica S.W. 30

Chemical-mechanical abrasive for compatible material
Super-finishing standard liquid to use pure or diluted up to 50%
Silica concentration: 30%
Size of particles: 30 nm
pH = 10

Packaging
Ref. 
5 liters tin Z000 A25L1
10 liters tin Z000 A2010

AQUA LAM® colloidal silica S.W. 36

Silica concentration: 50%
Size of particles: 50 nm
pH = 9

 Packaging Ref. 
5 liters tin Z000 C55L1
10 liters tin Z000 C5610

AQUA LAM® colloidal silica NOVAL S finishing

Super-finishing liquid. Obtaining ultra-low roughness
Contains an additive “anti-crystallisation” which facilitate the cleaning of the parts and the machines. Silica concentration: 30%
Size of particles: 30 nm
pH = 10

 Packaging Ref. 
5 liters tin Z000 F75L1
10 liters tin Z000 F7010
20 liters tin Z000 F7020

AQUA LAM® colloidal silica NOVAL concentrated

Formulated to be added to pure colloidal silica
Additive that cancels crystallisation and decantation of the pure colloidal silica pure
Increases the stock removal, powers the roughness
Silica concentration: 35%
Size of particles: 30 nm
pH = 9

 Packaging Ref. 
10 liters tin Z000 F8010
20 liters tin Z000 F8020

BIOLAP® abrasive compounds

Concentrated fluid abrasive pastes. Oil base, auto-lubricants, intended for the lapping of parts between them and/or cylindrical lapping. Biodegradables, no smell, no dangerous substances.

lamplan abrasifscomposites biolappotseriel lamplan abrasifscomposites biolappotseriecrl
BIOLAP® L Series BIOLAP® Cr L Series

Advantages

– VOC free
– No water spots
– Alumina base, silicon carbide or boron carbide
– Grains from 0,05 to 125 microns
– Biodegradable products
– Low viscosity
– Packaging: in 50 and 250 cm3 pots

 

BIOLAP® paste L series Aluminium oxide (AI2O3)

Conventional abrasives
Complex parts Lapping polishing
Fluid texture

For personalised formulation please contact us (free estimate).

    Pot 50 cm3 Pot 250 cm
FEPA
µm Ref. Ref. 
100 125 A125 O3P05 A125 O3P25
120 105 A105 O3P05 A105 O3P25
150 88 A088 O3P05 A088 O3P25
180 74 A074 O3P05 A074 O3P25
220 62 A062 O3P05 A062 O3P25
240 45 A045 O3P05 A045 O3P25
280 37 A037 O3P05 A037 O3P25
320 29 A029 O3P05 A029 O3P25
360 23 A023 O3P05 A023 O3P25
400 17 A017 O3P05 A017 O3P25
500 13 A013 O3P05 A013 O3P25
600 9 A009 O3P05 A009 O3P25
800 7 A007 O3P05 A007 O3P25
1000 5 A005 O3P05 A005 O3P25
1200 3 A003 O3P05 A003 O3P25
1500 1 A001 O3P05 A001 O3P25
1800 0,7 CP70 O3P05 CP70 O3P25
2000 0,4 CP40 O3P05 CP40 O3P25
2200 0,2 CP20 O3P05 CP20 O3P25
4500 0,05 CP05 O3P05 CP05 O3P25

BIOLAP® paste Cr L series Aluminium oxide (AI2O3)

Conventional abrasives and chromium oxide
Lapping polishing
Operations under high constraints
Resistant to friction and heating

For personalised formulation please contact us (free estimate).

    Pot 50 cm3 Pot 250 cm
FEPA
µm Ref. Ref. 
100 125 A125 O5P05 A125 O5P25
120 105 A105 O5P05 A105 O5P25
150 88 A088 O5P05 A088 O5P25
180 74 A074 O5P05 A074 O5P25
220 62 A062 O5P05 A062 O5P25
240 45 A045 O5P05 A045 O5P25
280 37 A037 O5P05 A037 O5P25
320 29 A029 O5P05 A029 O5P25
360 23 A023 O5P05 A023 O5P25
400 17 A017 O5P05 A017 O5P25
500 13 A013 O5P05 A013 O5P25
600 9 A009 O5P05 A009 O5P25
800 7 A007 O5P05 A007 O5P25
1000 5 A005 O5P05 A005 O5P25
1200 3 A003 O5P05 A003 O5P25
1500 1 A001 O5P05 A001 O5P25
1800 0,7 CP70 O5P05 CP70 O5P25
2000 0,4 CP40 O5P05 CP40 O5P25
2200 0,2 CP20 O5P05 CP20 O5P25
4500 0,05 CP05 O5P05 CP05 O5P25

BIOLAP® paste L series Silicon carbide (SIC)

Conventional abrasives
Complex parts Lapping polishing
Fluid texture

For personalised formulation please contact us (free estimate).

    Pot 50 cm3 Pot 250 cm
FEPA
µm Ref. Ref. 
80 177 E177 O3P05 E177 O3P25
100 125 E125 O3P05 E125 O3P25
120 105 E105 O3P05 E105 O3P25
150 88 E088 O3P05 E088 O3P25
180 74 E074 O3P05 E074 O3P25
220 62 E062 O3P05 E062 O3P25
240 45 E045 O3P05 E045 O3P25
280 37 E037 O3P05 E037 O3P25
320 29 E029 O3P05 E029 O3P25
360 23 E023 O3P05 E023 O3P25
400 17 E017 O3P05 E017 O3P25
500 13 E013 O3P05 E013 O3P25
600 9 E009 O3P05 E009 O3P25
800 7 E007 O3P05 E007 O3P25
1000 5 E005 O3P05 E005 O3P25
1200 3 E003 O3P05 E003 O3P25

BIOLAP® paste Cr L series Silicon carbide (SIC)

Conventional abrasives and chromium oxide
Lapping polishing
Operations under high constraints
Resistant to friction and heating

For personalised formulation please contact us (free estimate).

    Pot 50 cm3 Pot 250 cm
FEPA
µm Ref. Ref. 
80 177 E177 O5P05 E177 O5P25
100 125 E125 O5P05 E125 O5P25
120 105 E105 O5P05 E105 O5P25
150 88 E088 O5P05 E088 O5P25
180 74 E074 O5P05 E074 O5P25
220 62 E062 O5P05 E062 O5P25
240 45 E045 O5P05 E045 O5P25
280 37 E037 O5P05 E037 O5P25
320 29 E029 O5P05 E029 O5P25
360 23 E023 O5P05 E023 O5P25
400 17 E017 O5P05 E017 O5P25
500 13 E013 O5P05 E013 O5P25
600 9 E009 O5P05 E009 O5P25
800 7 E007 O5P05 E007 O5P25
1000 5 E005 O5P05 E005 O5P25
1200 3 E003 O5P05 E003 O5P25

CLASSICAL abrasive pastes

High concentration abrasive compound. Optimises the texture of the abrasive film in order to obtain a rapid, maximal and extended abrasion. Non greasy, miscible to water and to the additive 716.

CLASSICAL paste Aluminium oxide (AI2O3)

Abrasifs conventionnels
High purity

For personalised formulations, please contact us (free estimate).

    Pot 1 kg
Seau 10 kg 
FEPA
µm Ref. Ref. 
100 125 A125 R101K A125 R110K
120 105 A105 R101K
A105 R110K
150 88 A088 R101K
A088 R110K
180 74 A074 R101K
A074 R110K
220 62 A062 R101K
A062 R110K
240 45 A045 R101K
A045 R110K
280 37 A037 R101K
A037 R110K
320 29 A029 R101K
A029 R110K
360 23 A023 R101K
A023 R110K
400 17 A017 R101K
A017 R110K
500 13 A013 R101K
A013 R110K
600 9 A009 R101K
A009 R110K
800 7 A007 R101K
A007 R110K
1000 5 A005 R101K
A005 R110K
1200 3 A003 R101K
A003 R110K

CLASSICAL paste Silicon carbide (SIC)

Abrasifs conventionnels
High purity

For personalised formulations, please contact us (free estimate).

    Pot 1 kg
Seau 10 kg 
FEPA
µm Ref. Ref. 
120 ébauche 105 E105 R101K
E105 R110K
180 moyen 74 E074 R101K
E074 R110K
240 fine 45 E045 R101K
E045 R110K
320 29 E029 R101K
E029 R110K
400 17 E017 R101K
E017 R110K
500 13 E013 R101K
E013 R110K
600 9 E009 R101K
E009 R110K
1000 5 E005 R101K
E005 R110K
1200 3 E003 R101K
E003 R110K

AQUA LAM® abrasive powders

AQUA LAM® powder Aluminium oxide (AI2O3)

Standard abrasive
High purity

Commonly called “ polishing alumina”, chemical symbol Al2O3. They are composed of various family: purified aluminas, melted aluminas, calcinated aluminas, submicron aluminas. Their choice is defined according to result criterias and economical expectancies. Grains included between 0,03 micron and 200 microns.

    Bucket 5 kg
Bucket 25 kg 
FEPA
µm Ref. Ref. 
100 125 A125 P105K A125 P125K
120 105 A105 P105K
A105 P125K
150 88 A088 P105K
A088 P125K
180 74 A074 P105K
A074 P125K
220 62 A062 P105K
A062 P125K
240 45 A045 P105K
A045 P125K
280 37 A037 P105K
A037 P125K
320 29 A029 P105K
A029 P125K
360 23 A023 P105K
A023 P125K
400 17 A017 P105K
A017 P125K
500 13 A013 P105K
A013 P125K
600 9 A009 P105K
A009 P125K
800 7 A007 P105K
A007 P125K
1000 5 A005 P105K
A005 P125K
1200 3 A003 P105K
A003 P125K
1500 1 A001 P105K A001 P125K

AQUA LAM® powder Silicon carbide (SIC)

Standard abrasive
High purity

The silicon carbide is a pure chemical corps, chemical symbol SiC. The grains are grey,
green or black. The grain F1500 used for specific super-finishing is grey. The silicon carbide AQUA LAM® endures a special treatment and a separation under a high magnetic intensity to insure a dusting and a maximal cleaning. AQUA LAM® proposes all the grains FEPA F useful in lapping, from F60 (250 microns) to F1200 (3 microns).

    Bucket 5 kg
Bucket 25 kg 
FEPA
µm Ref. Ref. 
60 250 E250 P105K E250 P125K
80 177 E177 P105K E177 P125K
100 125 E125 P105K E125 P125K
120 105 E105 P105K
E105 P125K
150 88 E088 P105K
E088 P125K
180 74 E074 P105K
E074 P125K
220 62 E062 P105K
E062 P125K
240 45 E045 P105K
E045 P125K
280 37 E037 P105K
E037 P125K
320 29 E029 P105K
E029 P125K
360 23 E023 P105K
E023 P125K
400 17 E017 P105K
E017 P125K
500 13 E013 P105K
E013 P125K
600 9 E009 P105K
E009 P125K
800 7 E007 P105K
1000 5 E005 P105K
 
1200 3 E003 P105K

AQUA LAM® powder Cerium oxide (CeO2)

Chemical symbol CeO2. Used in super finishing mostly for the polishing of glass (example BK7, 520 knoops) the cerium oxide reduces the roughness by a chemical and mechanical actions. Selected according to its maximum polishing action, the cerium oxide AQUA LAM® has grains from 3 to 0,5 microns (other grains dimensions on demand).

    Pot 500 g  Pot 1 kg 
FEPA
µm Ref.  Ref. 
1200 3 I003 P1P5K
I003 P101K
1300 2 I002 P1P5K I002 P101K
1400 1 I001 P1P5K I001 P101K
1500 0,7 JP70 P1P5K JP70 P101K
1600 0,5 JP50 P1P5K JP50 P101K

Guidance

Dilution of AQUALAM® CLASSIC and BIOLAM®PLUS solutions

1 part concentrated abrasive product
2 parts ADDITIVE 716
4 parts tap water

ADDITIVE 716 optimises the abrasive film and protects the parts and the cast iron plate from corrosion.

Assistance & information

Contact us

Committed to providing you with quality answers, we invite you to send us a message with your contact details so that our staff can answer you as soon as possible.


Our social networks

lam plan société gaillard
With the support
La Région Auvergne Rhône-Alpes

Contact us

LAM PLAN S.A.S
7, rue des Jardins - B.P.15
74240 Gaillard - France
header-receiver +33 (0)4 50 43 96 30

Our dealers

All rights reserved © LAM PLAN S.A.S / Webmaster: Ctoutcom Studio