Composite abrasives
Abrasive compounds, liquids, pastes & powder, BIOLAM®, AQUA LAM®, BIOJET plus, BIOLAP®
CLASSICAL composite abrasives
Lapping on cast iron plates
A high-performance product which has proven its adaptability to all usage, especially for large tanks and intensive usage. According to the concentration intended, 1 litre of abrasive solution allows obtaining between 5 and 10 litres of abrasive.
Advantages
– Increasing working speed.
– Easy resuspension of the mixture.
– Soft abrasive film, efficient and balanced.
– Very low smell.
– Low running costs.
– Easy cleaning. Detergent 711-103.
– Ingenious packaging: packs 2 x 2 liters stackable and 4 x 2 liters (reduced handling).
Concentrated abrasive slurry, easy-to-use and easy cleaning.
1 pack of 2 x 2 liters = 20 to 30 liters of solution. These products allow working with abrasive concentration adjustable to usage. Requiring a brewing while using it. Easy resuspension. Compatible with the additive 716.
BIOLAM® composite abrasives
Conventional abrasive
Lapping on cast iron plate
Biodegradable
A new generation of biodegradable abrasive slurries developed by our Research and Development services. Very useful for the lapping machine equipped with a medium size tank.
Advantages
– Easy to use and to put in work.
– Low decantation of the abrasive, regularity of results.
– Consistent and ready abrasive film.
– No dangerous substances.
– Low running costs.
– Very low smell.
– Simple and easy cleaning (ex: water or water + ordinary detergent).
– Compact packaging: 2 and 20 litres jerrycans other packaging on demand.
BIOLAM®PLUS to dilute and BIOLAM S ready-to-use
Plus: Smooth abrasive slurry, no smell, biodegradable, easy to clean. Limited decantation, no additive needed. dilute 1 to 5 times in water.
S: Biodegradable and no smell liquid slurry, non-toxic.
Easy to clean. Simple usage: to put directly in the abrasive tank of the machine, limited decantation.
Depending of the use can be used pure or can be diluted up to 2 times in water.
AQUA LAM® colloidal silica
Super-finishing
Simplified cleaning
The colloidal silicas are stabilised suspensions with fine non-agglomerated spherical
particles. This aqueous solution contains a high concentration of nanoscale silica.
During usage, colloidal silicas are generally diluted in water to proportions between 10 and 50%. We advise a 20% dilution in water for an optimum use.
These products are always used for super-finishing.
BIOLAP® abrasive compounds
Concentrated fluid abrasive pastes. Oil base, auto-lubricants, intended for the lapping of parts between them and/or cylindrical lapping. Biodegradables, no smell, no dangerous substances.
 |
 |
| BIOLAP® L Series | BIOLAP® Cr L Series |
Advantages
– VOC free
– No water spots
– Alumina base, silicon carbide or boron carbide
– Grains from 0,05 to 125 microns
– Biodegradable products
– Low viscosity
– Packaging: in 50 and 250 cm3 pots
CLASSICAL abrasive pastes
High concentration abrasive compound. Optimises the texture of the abrasive film in order to obtain a rapid, maximal and extended abrasion. Non greasy, miscible to water and to the additive 716.
AQUA LAM® abrasive powders
+33 (0)4 50 43 96 30